Turn Signal Flasher Unit - Renewal; Instrument Illumination; Warning Lights - Triumph TR6 Handbook

ELECTRICAL
_f
l*-ut
lllumination
hrll bulb holder-which is a component of the main harness
-from
instrument. IJnscrew bulb from holder. Renew bulb
and re-assemble. Note speedometer and tachometer each contain
tso illumination bulbs.
lVarning Lights
Pull bulb holder-which is a component of the main
harness-from instrument or housing.
[Jnscrew bulb from
holder. Renew bulb and re-assemble.
TURN SIGNAL FLASHER UNIT-RENEWAL
Locate unit attached to clip secured to bulkhead end panel
adjacent to passengers feet.
Pull unit from clip. Disconnect
electrical connectors. Connect electrical connectors to new unit
and insert into clip.
NOTE: Fig. 55 shows L.H. steering condition.
l a
tg
i",$ff
Fig. 53
Fig. 54
trrg. Jt
41