Table of Contents
Advertisement
A
6)
Fig. 10 (right)
SAFETY HARNESS
Safety harness anchorage points built into the vehicle
shown on Figs. 8 and 9.
Fitting the Harness
Remove the shoulder strap anchor bolt, crimped washer and
collar from each wheelarchi pass the bolt through the strap
attachment, fit the crimped washer and collar, as shown on Fig.
10, and refit to the vehicle. Fit the latched hook of the lap strap
to the eye bolt (Fig. 9), and note that the shoulder strap will have
a half twist when fitted to the wheelarch.
Using the Harness
Pass the buckle end of the belt around the hips and the
shoulder strap over the shoulder adjacent to the door. Fasten the
belt by pushing the locking plate into positive engagement with
the buckle. This is denoted by a
'click'. To release the harness
depress the centre panel.
Harness Adiustment
The belt should be adjusted so that the hand will pass between
the strap and the chest. The lap strap should be reasonably tight
with thi buckle resting on the hip nearer the centre of the vehicle.
' : , j
t4
Fie. 8 (left)
Fig. 9 (upper)
Hide quick links:
Advertisement
Table of Contents
