Kenwood DVF-3020 Service Manual page 23

AO AP
VDAC/module(4/8)
1
2
3
4
5
6
7
AQ AR AS AT
ADSC SECTION : (1/8), SRV SECTION : (2/8), AVDEC SECTION : (3/8), VDAC SECTION : (4/8)
FEP SECTION : (5/8), CPU SECTION : (6/8), CLK SECTION : (7/8), ODC SECTION : (8/8)
The DC voltage is an actual reading measured
with a high impedance type voltmeter with no
signal input. The measurement value may vary
depending on the measuring instruments used or
on the product.
AU AV
Y22-8202-73
AW AX
CAUTION: For continued safety,
replace safety critical compo-
nents only with manufacturer's
recommended parts (refer to
parts list). indicates safety criti-
cal components. For continued
protection against risk of fire,
replace only with same type and
rating fuse(s). To reduce the risk
of electric shock, leakage-current
or resistance measurements shall
be carried out (exposed parts are
acceptably insulated from the
supply circuit) before the appli-
ance is returned to the customer.
DVF-3020