Toshiba E-STUDIO165 Service Manual page 7

Eliminated portion ................ Leading edges: 3.0±2.0 mm, Side/trailing edges: 2.0±2.0 mm (copy)
Paper feeding ......................... Standard drawer:
Capacity of originals in the automatic document feeder (Option)
.................................................. A3 to A5-R, LD to ST-R:
Toner supply ........................... Automatic toner density detection/supply
Density control ..................... Automatic density mode and manual density mode selectable in 7
Weight.................................. Approximately 32 kg (70.55 lb.) (excluding the developer material and
Power requirements............. AC 110 V / 13.2 A, 115 V or 127 V / 12 A
* The acceptable value of each voltage is ±10%.
Power consumption ............. 1.5 kW or less (100 V series)
* The electric power is supplied to the ADF and RADF through the equipment.
Total counter ........................ Electronical counter
April 2006 © TOSHIBA TEC
Leading / trailing edges: 5.0±2.0 mm, Side edges: 5.0±2.0 mm (print)
1 drawer (stack height 28 mm, equivalent to 250 sheets; 64 to
2
80 g/m (17 to 22 lb. Bond))
Paper Feed Unit (PFU):
Option (One drawer: stack height 28 mm, equivalent to 250
sheets; 64 to 80 g/m
Bypass feeding:
Stack height 11.8 mm: equivalent to 100 sheets; 64 to 80 g/m
(17 to 22 lb. Bond)
Paper Feed Pedestal (PFP):
Option (One drawer or two: stack height 60.5 mm, equivalent to
550 sheets; 64 to 80 g/m
100 sheets / 80 g/m
Toner cartridge replacing method (There is a recovered toner supply
mechanism.)
steps
toner)
220-240 V or 240 V / 8 A (50/60 Hz)
1.6 kW or less (200 V series)
e-STUDIO165/205 SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
1 - 3
2
(17 to 22 lb. Bond))
2
(17 to 22 lb. Bond))
2
(Stack height 16 mm or less)
1
2