Specifications - Toshiba E-STUDIO165 Service Manual

1. SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
1.1

Specifications

Values in [ ] are for e- STUDIO205 in case that the specification is different among e-STUDIO165
and e-STUDIO205.
Copy process
Type
Original table
Accepted originals
Copy speed (Copies/min.)
e-STUDIO165
Paper size
A4, B5, LT
A5-R, ST-R
A4-R, B5-R, LT-R
B4, LG, FOLIO, COMPUTER
A3, LD
e-STUDIO205
Paper size
A4, B5, LT
A5-R, ST-R
A4-R, B5-R, LT-R
B4, LG, FOLIO, COMPUTER
A3, LD
* "–" means "Not acceptable".
* The copy speed in the above table are available when originals are manually placed for single side,
multiple copying.
* When the ADF and RADF are used, the copy speed of 16[20] sheets per minute is only available
under the following conditions:
• Original/Mode:
• Number of sheets:
• Reproduction ratio:
April 2006 © TOSHIBA TEC
Indirect electrophotographic process (dry)
Desktop type
Fixed type (the left rear corner used as guide to place originals)
Sheet, book and 3-dimensional object. The automatic document feeder
(ADF) and reversing automatic document feeder (RADF), only accepts paper
which are not pasted or stapled. (Single-sided originals: 50 to 127 g/m
34 lb. Bond) Carbon paper are not acceptable either.
Maximum size: A3/LD
Drawer
Size specified
16
-
15.5
13
11
Drawer
Size specified
20
-
15.5
13
11
Single side original/A4/LT size. APS/automatic density are not selected.
16[20] or more.
100%
e-STUDIO165/205 SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
Bypass feed
Size not specified
16 11
16 11
15.5 11
13 11
11 11
Bypass feed
Size not specified
20 11
20 11
15.5 11
13 11
11 11
1
1
2
/13 to
PFU
16
-
15.5
13
11
PFU
20
-
15.5
13
11