Advertisement
Setup
Configuration requires the use of a Windows PC. Once configured, any
device may be connected to the HomePlug Adapter's Ethernet port. To
perform configuration, follow this procedure.
1.
Connect a standard LAN cable from the HomePlug Adapter's
Ethernet port to your PC.
2.
Plug the HomePlug Adapter into a normal AC power point.
3.
Wait a few seconds for startup to be completed, and then check
the LEDs
The Power LED should be ON.
The HomePlug LED will be ON if other HomePlug
devices are detected, otherwise it will be OFF.
The Ethernet LED should be ON.
4.
Insert the supplied CD-ROM into your Windows PC, and wait for
it to start. If it does not start, locate and run SETUP.EXE.
5.
Follow the prompts to install the LevelOne PLI-2020 utility.
6.
Once installation is completed, run the LevelOne PLI-2020 utility
program. The first screen (Main Tab) will display all compatible
devices found.
Advertisement
