Sound Off; Delay End; My Cycle - Samsung WD1102XV User Manual

Table of Contents

Sound off

The Sound Off function can be selected during all courses. When this function is selected, sound

is turned off for all courses. Even if the power is turned on and off repeatedly, the setting is

retained.

Activating/Deactivating

If you want to activate or deactivate the Sound Off function. The "Sound Off

this feature is activated.

You can set the washing machine to ﬁ nish your wash automatically at a later time, choosing a

delay of max 24 hours (in 1 hour increments). The hour displayed indicates the time at which the

wash will be ﬁ nished

1. Manually or automatically set your washing machine according to the type of laundry you are

washing.

2. Press the Delay End button repeatedly until the delay time is set.

3. Press the Start/Pause button. The "Delay End

counting down until it reaches the set time.

4. To cancel a Delay End function, press the Power button and then turn the washing machine

on again.

Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one button

convenience.

By pushing the My Cycle button, you activate the settings used during the My Cycle mode. The

"My Cycle" light goes on, indicating activation. You can select all options as follows in "My Cycle"

mode.

1. Select the cycle using the Cycle Selector dial.

2. After cycle selection, set each option.

See the "Cycle Chart" on page 41 for available option settings with each cycle.

3. Start "My Cycle" by pushing the Start/Pause button in "My Cycle" mode.

The washer will display the cycle and options you selected the next time you choose "My Cycle".

You can change the "My Cycle" settings by repeating the same process above.

The washer displays the last settings used the next time you choose "My Cycle".

YUKON-03073A-08_EN (Australia).indd Sec5:27

" indicator will be lit, and the clock will begin

English - 27

" will be lit when

2016-04-11

6:35:24

Table of Contents