Child Lock - Samsung WD1102XV User Manual

washing a load of laundry

Child lock

Child Lock prevents children from playing with your washer.
Once you have activated the Child Lock function, the control panel cannot be activated,
preventing children from playing with the washer.
Activating/Deactivating
Press and hold both the Spin and Drying buttons simultaneously
for approximately 3 seconds.
• When you activate the Child Lock function, the door locks
and the "Child Lock [
• If you press the Start/Pause button after you have activated
the Child Lock function , none of the buttons will work
except for the Power button.
• If you press a button when the buttons are locked, the "Child
Lock [
Pausing the Child Lock function
When the door is locked or the buttons are locked by the Child
Lock function, you can pause the
Child Lock operation for 1 minute by pressing and holding both
the Spin and Drying buttons
simultaneously for approximately 3 seconds.
• If you pause the Child Lock mode temporarily, the door lock is released for 1 minute for user
convenience. During this period, the "Child Lock [
• If you open the door after the minute is over, an alarm sounds for up to 2 minutes.
• If you close the door within the 2 minutes, the door is locked and the Child Lock function is
reactivated. If you close the door after the 2 minutes, the door is not locked automatically
and no alarm sounds.
Deactivating the Child Lock function
Press and hold both the Spin and Drying buttons simultaneously for approximately 6 seconds.
• When you deactivate the Child Lock function, the door is unlocked and the "Child Lock [
is turned off.
• The Child Lock function prevents children or the infi rm from accidently operating the washer
and injuring themselves.
• If a child enters the washing machine, the child may become trapped and suffocate.
• Once you have activated the Child Lock function, it continues working even if the power is
turned off.
• Opening the door by force can result in injury due to damage to the product.
To add laundry after you have activated the Child Lock function, you must fi rst pause or
deactivate the Child Lock function.
If you want to open the door of the washing machine when the Child Lock function is activated:
• Pause or deactivate the Child Lock function.
• Turn the washing machine off and then on again.
When the Child Lock function is activated, only the Power button works. The Child Lock
function remains on even after the power is turned on and off or after the disconnecting and
reconnecting the power cord.
YUKON-03073A-08_EN (Australia).indd Sec5:26 YUKON-03073A-08_EN (Australia).indd Sec5:26
]" lamp illuminates.
]" lamp blinks.
English - 26
]" lamp blinks.
3 SEC.
]"
2016-04-11 2016-04-11 6:35:23 6:35:23