Audi Q7 Quick Reference Manual page 7

[21] ENGINE START button/ENGINE STOP button
With the Audi advanced key you can start the engine without
having to insert the key in the ignition lock. You only need
to have the remote control key on your person.
Switching on the ignition: Press the START button
down to the first stop (diesel engines: preheating starts in this
position).
Starting the engine: Press the brake pedal and press
r
START button down to the second stop on a vehicle
with automatic gearbox.
Switching off the engine: Stop the vehicle, move the
selec tor lever to position P or N and press the STOP
e
button .
Note: If you press the STOP button again for
at least one second, this will lock the
steering and switch off the MMI.
[22] Selector lever for automatic gearbox
Selector lever positions
P Parking lock
R Reverse gear
r N Neutral
briefly
D Drive
S Sport
WARNING!
Do not move the selector lever to positions P or R
when the vehicle is moving.
Note: Use the foot brake to hold the vehicle
when stationary with the engine running (in
all selector lever positions other than P).
Manual gear selection (tiptronic)
1
The tiptronic program enables you to change
2
gear manually. From position D, push the
selector lever to the right as far as the stop.
The gear which is currently engaged is high-
lighted in the instrument cluster display.
Push the selector lever forwards briefly to shift up a gear,
or pull the lever back to shift down a gear.
[4] Light switch
1
5
6
o
(
Page 7
To move the selector lever out of
position P or N, or into position
P or R, press the interlock button on
the selector lever handle and the
brake pedal simultaneously.
e
Off
r
AUTO
2
Sensor-controlled
activation/deactivation
3
t
Side lights
u
4 Dipped beam/
main beam head-
lights
In fog, turn switch to
dipped headlights position
st
and then pull out to 1 stop
i
( front fog lights) or to 2 nd stop
front and rear fog lights).