ivanko IVK 5500 Owner's Manual page 19

STEP 11 (See Diagram 11)
A.) Now move the machine to its final rest position. After installing the weight plates, the machine
might be too heavy to move.
B.) Align two Ø 2 ½" x 1" Rubber Bumpers (#76) onto the holes on the Main Base Frame (#2).
Insert two Guide Rods (#15) through the Bumpers and into the Base Frame. Slide 19 Weight
Plates (#48) onto the Guide Rods.
C.) Slide the Selector Stem (#47) with the Selector Rod (#36) onto the Guide Rods. Insert the
Selector Rod (#36) through the center hole.
D.) Insert a Weight Plate Selector Pin (#72) through the selected hole on the Weight Plates.
E.) Place the Top Socket Assembly (#20) onto the Guide Rods. Secure it to the Upper Frame (#5)
with two M10 x 2 ¾" Allen Bolts (#104), four Ø ¾" Washers (#118), and two M10 Aircraft Nuts
(#125). Securely tighten all nuts and bolts previously installed.
18