Samsung UA40F7500 User Manual page 29

3. Tighten the TV-holders on the wall mount adapters, as
shown by the illustration.
4. Fasten the Holder to the cabinet using a wood screw.
Use an M5 x L35 or a larger screw, the screw is not
✎
supplied.
Ensure that the Holder cord is in the middle of the TV
✎
Holder and that the Holder cord is stretched tight.
5. If you fasten the Holder to a wall, attach it as described in Step 4. Make sure to centre the Holder
cord and stretch it tight. Also, attach the Holder so that the cord is level with the ground or slanted
downwards from the wall.
When attaching the holder to a wall, use an anchor compatible with the wall's material. If you can,
✎
drive the screw into a stud (Recommended). The anchor, screw and stud are not supplied.
Install the TV close to the wall so that it does not fall.
✎
When attaching the TV-Holder cord to the wall, tie the cord level with the ground or slanted
✎
downwards for safety purposes.
Check the cord occasionally to make sure it is secure.
✎
Before moving the TV, separate the connected cord first.
✎
6. Verify all connections are properly secured. Periodically check the connections for any sign of fatigue or
failure. If you have any doubt about the security of your connections, contact a professional installer.
[UF7500_8000]BN68-04795D-02L02.indb 29
English - 29
Anchor
2013-05-08 5:07:53