Specifications; Installation - Kenwood KAC-5203 Service Manual

KAC-5203

SPECIFICATIONS

CEA-2006
RMS Watts per channel @ 4Ω, 1% THD+N .......................................... 55W x 2
Signal to Noise Ratio (Reference: 1W into 4Ω) ....................................... 80dBA
Audio Section
Max Power Output .................................................................................... 350W
Rated Power Output
Normal (4Ω) (20Hz~20kHz, 0.08% THD) .......................................... 55W x 2
Normal (4Ω) (DIN: 45324, +B=14.4V) ............................................... 55W x 2
Normal (2Ω) (1kHz, 0.8% THD) ......................................................... 75W x 2
Bridged (4Ω) (1kHz, 0.8% THD) ...................................................... 150W x 1
Frequency Response (+0, –3dB) .................................................... 5Hz~50kHz
Sensitivity (rated output) (MAX.) ................................................................ 0.2V
Sensitivity (rated output) (MIN.) ................................................................. 5.0V
Signal to Noise Ratio ................................................................................. 95dB
Input Impedance ....................................................................................... 10kΩ
Low Pass Filter Frequency (-12dB/oct.) .................................................... 80Hz
General
Operating Voltage ...................................................... 14.4V (11~16V allowable)
Current Consumption .................................................................................. 17A
Dimensions (W x H x D)
........................................ 230 x 55 x 198 mm (9-1/16 x 2-3/16 x 7-13/16 inch)
Weight ........................................................................................ 1.7kg (3.75lbs)
KENWOOD follows a policy of continuous advancements in development.
For this reason specifications may be changed without notice.

INSTALLATION

230mm
217.4mm
ø4.6
Self-tapping screw
(ø4 x 16 mm)
Installation board, etc.
(thickness : 15mm or more)