JVC UX-G70 Instructions Manual page 35

– This System can playback JPEG files with the extension
code <.jpg> or <.jpeg> (regardless of the letter case—
upper/lower).
– This System may not playback JPEG files properly if
they are recorded on a device other than a digital still
camera.
– During slide-show playback, zoom cannot be operated.
Playing Back a Portable Audio Device:
• When QP Link fails due to a weak sound signal from the
LINE IN jack, Auto Standby may turn the System off even
if you can hear the sound from the speakers.
In such cases, adjust the volume level of the component
louder so that the System can detect the sound signal
properly.
• Changing from LINE to another source while QP Link
works will deactivate QP Link temporarily.
In this case, the following reactivates QP Link:
– Pressing QP LINK on the remote control.
– Unplugging the component from the LINE IN jack, then
plugging it again.
• If you press STANDBY
preset Timer turns the System off while QP Link works, the
System will deactivate QP Link temporarily.
In such cases, the following reactivates QP Link:
– When no sound signal comes from the LINE IN jack for
about 30 seconds after the System is turned off.
– When you turn on the power again.
• QP Link may start working when you just plug in the
component to the LINE IN jack or unplug it. This is not a
malfunction.
Enjoying a video game:
• When enjoying a game with your video game connected to
this System, connect this System and your TV with the
composite video cable.
• Connect your video game and this System with the cable
compatible with your video game.
• Sound Turbo II, AHB Pro and BASS/TREBLE settings are
not available when GAME is selected as the source.
However, you can adjust BASS/TREBLE setting with
"G5 MANUAL" selected.
Playing Back from the PC:
• Check if your PC equipped with the CD-ROM drive is
running on Windows
Windows R Me*, Windows
prepare its CD-ROM.
*Microsoft , Windows
R
Me, Windows 2000 and Windows
R
trademarks of Microsoft corporation.
• DO NOT turn off the System or disconnect the USB cable
while installing the drivers or until your PC has recognized
the System.
• Use a full speed USB cable (version 1.1).
• If your PC does not recognize the System, disconnect the
USB cable and connect it again. If this does not work,
restart Windows.
Downloaded From Disc-Player.com JVC Manuals
to turn the System off or if
R 98*, Windows R 98SE*,
R 2000*, or Windows R
98, Windows 98SE, Windows
R R
XP are registered
R
• The drivers installed can be recognized only when the USB
cable is connected between the System and your PC.
• The sound may not be played back correctly—interrupted
or degraded—due to your PC settings or PC specifications.
Daily Operations—Sound & Other Adjustments
(see pages 12 to 15)
Adjusting the Sound:
• This function also affects the sound through the
headphones.
Changing the Scanning Mode:
• You cannot change the scanning mode to progressive in the
following cases:
– When your TV does not support the progressive video
input.
– When you have not connected your TV to the system
using a component video cord.
Setting the Clock:
• "AM 12:00" will flash on the display until you set the
clock.
• The clock may gain or lose 1 to 2 minutes per month. If this
happens, reset the clock.
Unique DVD/VCD Operations
Selecting the Audio Track:
• On some DVD Video discs, you cannot change audio
languages while playing back.
Special Effect Playback:
• During slow-motion playback, no sound will be
reproduced.
• While zoomed in, the picture may look coarse.
Advanced Disc Operations
Programming the Playing Order—Program Play:
• While programming steps...
– You cannot eject any discs from the disc trays.
– Your entry will be ignored if you have tried to program
an item number that does not exist (for example,
selecting track 14 on a disc that only has 12 tracks).
Playing Repeatedly:
• When DVD Video or DVD Audio is loaded in this System,
playback of the disc next to the DVD Video or DVD Audio
XP* and
will not start, although
screen or
• A-B Repeat can be used within the same title while playing
R
a DVD Video, and within the same track for the other discs.
To operate using the On-screen Bar:
• For DVD-R/-RW in the VR format, "PG" or "PL" appears
instead of "TITLE" on the on-screen bar.
Operations on the Control Screen:
• If you press ON SCREEN on the remote control during
playback, playback information appears on the TV screen.
(see pages 16 to 18)
(see pages 19 to 27)
/REPEAT ALL on the TV
ALL
ALL in the display window is shown.
33