JVC UX-G70 Instructions Manual page 13

• While listening to another source...
Changes the source to LINE automatically. (If you change
from LINE to another source, QP link will be canceled.)
• While the System is on standby...
Turns on the System and activates the LINE source
automatically (except when the display is turned off).
MP3 WMA MONO ST TA NEWS INFO
1
DISC ALL A–B QP Link PG PL USB AHB PRO
GROUP RANDOM PRGM 3D PHONIC PRGR. B.S.P. BONUS
While QP Link plays back the device...
MP3 WMA MONO ST TA NEWS INFO
1
DISC ALL A–B QP Link PG PL USB AHB PRO
GROUP RANDOM PRGM 3D PHONIC PRGR. B.S.P. BONUS
Enjoying a video game
By connecting a video game to this System instead of a TV,
you can enjoy the image of the game with your TV and the
dynamic sound with this System.
• Refer also to the manual of your video game and TV.
To connect the video game
Yellow
White
Red
At the front panel
To enjoy powerful game sound
You can enjoy the sound effect for the genre or scene of the
game by selecting one of the settings below.
Remote control:
GAME
G1 SPORT
(initial setting)
G5 MANUAL
G1 SPORT For sport game (initial setting).
G2 RPG For RPG.
G3 ACT
For action game.
G4 NIGHT
For enjoying powerful game sound with
low sound level.
G5 MANUAL
You can adjust the bass and treble level
manually with this setting. See "To adjust
the tone" on page 12 for how to adjust it.
Downloaded From Disc-Player.com JVC Manuals
A.STBY REC
S.TURBO SLEEP Bubbles appear
REC 1 2 3
when QP Link
works.
A.STBY REC
S.TURBO SLEEP Bubbles disappear
REC 1 2 3
when the sound signal
stops or is too weak.
INFO
Video game
Main unit:
G2 RPG G3 ACT
G4 NIGHT
Playing Back from the PC
This System is equipped with a USB AUDIO terminal on the
front panel. You can connect your PC to this terminal and
enjoy sound reproduced through your PC.
When you connect your PC for the first time, follow the
procedure below.
• Remember you cannot send any signal or data to your PC
from this System.
IMPORTANT
• Always set volume to "VOL MIN" when connecting or
disconnecting the other equipment.
How to install the USB drivers
1
Turn on your PC and start running Windows
Windows R 98SE*, Windows
or Windows R XP*.
• If the PC has been turned on, quit all the applications
running.
2
Select "USB" as the source.
Remote control:
USB
3
Connect the System to the PC using a USB cable (not
supplied).
At the front panel
USB cable
• Use "USB series A plug to B plug" cable less than
3 m.
4
The USB drivers are installed automatically.
To playback sound on the PC
Refer to the manuals supplied with the sound reproduction
application installed in the PC.
• Noise and static electricity may stop the sound through the
USB connection. In this case, do the following operations:
– Disconnect and connect the USB cable again
– Restart the music software on your PC
– Turn off and on the System
* Microsoft R , Windows R 98, Windows
Windows R Me, Windows
registered trademarks of Microsoft corporation.
INFO
R 98*,
R Me*, Windows R 2000*,
Main unit:
PC
R 98SE,
R 2000 and Windows R XP are
11