Philips 272P4 User Manual page 13

2. Setting up the monitor
MultiView in OSD menu
• PiP / PbP Mode: There are two modes for
MultiView: [PiP] and [PbP].
[PiP]: Picture in Picture
Open up a sub-window of
another signal source.
When the sub source is not
detected:
[PbP]: Picture by Picture
Open up a sub-window side-
by-side of another signal
source.
When the sub source is not
detected:
Note
The black strip shows on the top and the
bottom of the screen for the correct aspect
ratio when in the PbP mode.
• PiP / PbP Input: There are four different
video input to choose as the sub display
source: [DVI], [HDMI 1], [HDMI 2], and
[DisplayPort].
Please refer below table for compatibility of
main/sub input source.
Inputs
DP
MAIN
DVI
SOURCE
HDMI 1
(xl)
HDMI 2
A
(main)
A
(main)
A
(main)
A
(main)
SUB SOURCE POSSIBILITY (xl)
DP DVI HDMI 1 HDMI 2
● ●
●
●
●
• PiP Size: When PiP is activated, there are
three sub-window sizes to choose: [Small],
[Middle], [Large].
B
• PiP Position: When PiP is activated, there
are four sub-window positions to choose.
B
B
Bottom-Left
B
B
B
• Swap:
picture source swapped on the display.
Swap A and B source in [PiP] mode:
Swap A and B source in [PbP] mode:
A
• Off:
●
11
B
Small
A
Middle
Large
(main)
Top-Left
A
(main)
A
(main)
The main picture source and the sub
B
A
↔
(main)
B
↔
(main)
Stop MultiView function.
A
(main)
Top-Right
B
A
(main)
Bottom-Right
A
(main)
B
A
B
(main)
B A
(main)