Fuel Gauge
The fuel gauge shows the amount of fuel in the tank. It
operates only when ignition switch is in the On position
(Figure 8). Red indicates low fuel level and blinking red
indicates near empty.
High Flow Hydraulics Switch (TC
models only)
Turn on the switch to activate the high flow hydraulics (Figure
8).
Horn Button (TC models only)
Pressing the horn button activates the horn (Figure 8).
Tachometer
Registers the speed of the engine (Figure 8 andFigure 9). The
white triangle indicates desired speed for PTO operation
(Figure 9).
1. Speed of the engine
Check Engine Light
The light (Figure 8) will illuminate to notify operator of a
engine malfunction.
Speedometer
Registers the ground speed of the vehicle (Figure 8). The
speedometer is in mph but can easily converted to km/h.
Refer to Converting the Speedometer (page 48).
Power Point
Use the power point (Figure 8) to power optional 12 volt
electrical accessories.
Figure 9
2. 3300 rpm for 540 rpm PTO
operation
Passenger Hand Hold
The passenger hand hold is located on the dashboard (Figure
10).
1. Passenger hand hold
Seat Adjusting Lever
The seats can be adjusted fore and aft for operator comfort
(Figure 11).
1. Seat adjusting lever
16
Figure 10
2. Storage compartment
Figure 11