Panasonic DMC-FZ30PP Operating Instructions Manual page 52

• Do not stare at the photo flash from
• Do not bring the flash too close to
• Do not cover the photo flash with your
• The flash icon turns red when activating
• When you take a picture beyond the flash
• When you repeat taking a picture,
• When the jitter alert appears, we
• When you set to burst mode or auto
• When the flash is being charged, the flash
• When taking a picture with the flash,
• Do not close the flash soon after the flash
• When taking a picture with the flash, the
• When the shutter speed is fast, the flash
52
VQT0R81
Downloaded From camera-usermanual.com Panasonic Manuals
close proximity.
objects or close the flash while it is
activated. The objects may be
discolored by its heat or lighting.
fingers or any other items.
the flash and pressing the shutter button
halfway.
control range, the exposure may not be
adjusted properly and the picture may
become bright or dark.
recording may be disabled even if the
flash is activated. Take a picture after the
access indication disappears.
recommend using the flash.
bracket, only 1 picture is recorded for
every flash activated.
icon blinks red, and you cannot take a
picture even when you press the shutter
button fully.
we recommend removing the lens
hood. In some cases it may not allow
the scene to be illuminated properly.
is activated prior to taking pictures due to
AUTO/Red-eye reduction etc. It causes a
malfunction.
white balance will be automatically
adjusted [except for [ ] (Daylight) and
[ ] (Flash)], but the white balance may
not be properly adjusted if the flash level
is insufficient.
effect may not be sufficient.
Recording pictures (basic)
• Refer to P97 for information about extra
flashes.
• When using a conversion lens, the built-in
flash setting is fixed to Forced OFF [ ].