Panasonic DMC-FZ30PP Operating Instructions Manual page 23

[SETUP] menu (Refer to P21 for the setting method.)
[1MIN.]/[2MIN.]/[5MIN.]/[10MIN.]:
[OFF]: The power save mode is not
• Press the shutter button halfway or turn
the camera off and on to cancel the power
save mode.
• When using the AC adaptor (DMW-CAC1;
optional)/connecting to a PC or a printer/
recording motion pictures/playing back
motion pictures/during Slide Show, the
power save mode is not activated.
(However, during a manual Slide Show,
the setting for the power save mode is
fixed to [10MIN.])
In manual focus, assistance screen
appears on the center of the screen to
facilitate focusing on the subject. (P46)
[MF1]: The center of the screen is
[MF2]: The whole of the screen is enlarged.
[OFF]: The screen is not enlarged.
[
[
[
Set to select the volume of shutter sound.
[
[
[
Downloaded From camera-usermanual.com Panasonic Manuals
[POWER SAVE]
The power save mode is activated
(the camera is automatically turned
off to save the battery life) if the
camera has not been used for the
time selected on the setting.
activated.
[MF ASSIST]
(Recording mode only)
enlarged. You can adjust the focus
while determining the composition
of the whole of the screen.
It is convenient for adjusting the
focus in Wide.
[BEEP]
]: No operational sound
]: Soft operational sound
]: Loud operational sound
[SHUTTER]
]: No shutter sound
]: Soft shutter sound
]: Loud shutter sound
Preparation
[VOLUME]
The volume of speakers can be adjusted in
7 steps. (LEVEL 6 to 0)
• When you connect the camera to a TV,
the volume of the speakers of the TV is
not changed.
[CLOCK SET]
Change date and time. (P20)
[NO.RESET]
Set this when you want to start the file
number of the picture from 0001 on the
next recording. (The folder number is
updated, and the file number starts from
0001.)
• The folder number can be assigned from
100 to 999.
When the folder number reaches 999, you
cannot reset the file number. We
recommend formatting the card after
saving the data on a PC or elsewhere.
• To reset the folder number to 100, format
the card first and then use this function to
reset the file number.
After that, the reset screen for the folder
number appears. Select [YES] to reset the
folder number.
• Refer to P119 for detailed information
about the file number and the folder
number.
23
VQT0R81