Mechanism Adjustment - Pioneer DV-47A Service Manual

QQ
3 7 63 1515 0

6.5 MECHANISM ADJUSTMENT

Tangential and Radial Height Coarse Adjustment
1
START
• Remove the servo mechanism.
• Remove a Spacer for height adjustment
attached to the back side (shaded area)
of the Servo Mechanism (Float Base) with
nippers.
Spacer for Height adjustment
Note:
Turn the Short switch to Short side when
removing the Pickup Flexible Cable.
(Refer to "7.1.7 DISASSEBLY".)
TE
L 13942296513
www
.
http://www.xiaoyu163.com
Servo Mechanism
Float Base
x ao u163
y
i
http://www.xiaoyu163.com
DV-47A, DV-S733A, DV-747A
2 9
8
Cautions:
Because there is not a Spacer for height adjustment in
adjustment after the second time, will keep it at need.
(This parts is Traverse mechanism exclusive use of a model
for 2001 years)
Put a spacer between a Tangential (or Radial) adjustment
screw and Mechanism Base and turn each screw to adjust
the height. (Refer to "6.1 ADJUSTMENT ITEMS AND
LOCATION".)
Turn a flat side
into bottom
Q Q
3 6 7 1 3 1 5
co
.
9 4 2 8
7.3mm
0 5 8 2 9 9 4 2 8
m
9 9
9 9
73