Playing A Sequence Of Tracks - Optimus CD-8250 Owner's Manual

42-5072.fm Page 16 Thursday, August 12, 1999 10:55 AM
PLAYING A SEQUENCE
OF TRACKS
You can program up to 32 selections
to play in any order you choose. A "se-
lection" can be an individual track or
an entire CD.
Follow these steps to program and
play a sequence of tracks.
Hint: You can open the disc tray com-
partment while you program the se-
quence, so you can check the loaded
CDs' tracks.
1. Press to cancel the cur-
STOP
rent function.
2. Press DISC NO. (or
select a CD.
To enter all the tracks on a CD as
one selection, skip to Step 4.
3. Press
TRACK NO.
to select a track.
4. Press to store the selec-
MEMORY
tion into memory.
pears and the time display shows
the disc number and track number
( A when you programmed all
tracks on a CD) along with
(programmed selection 1).
illustration
Note: If you enter a track number
higher than the highest track on a
CD, this entry is ignored during
programmed play.
16
DISC SKIP ) to
(or or )
ap-
PROGRAM
Notes:
P-01
5. Repeat Steps 2–4 for each track
or CD you want to program, up to
32 selections. The programmed
selection number on the display
increases with each added selec-
tion ( to
P-02 P-32
Note: If you try to store more than
32 selections, the CD changer
briefly displays FULL
6. Press to play the se-
PLAY
quence. If you programmed indi-
vidual tracks, the music calendar
displays the number
grammed tracks, with the current
track number flashing. If you pro-
grammed an entire CD, the music
calendar displays only the current
track playing.
After the CD changer plays all
programmed tracks, it stops and
reappears on the time dis-
P-01
play. The sequence is still in mem-
ory, so you can press
replay the sequence.
• You can use or
or , INTRO SCAN
and during programmed
SHUFFLE
play.
• You cannot use the
, or
DISC NO. TRACK NO.
during programmed play.
).
.
of pro-
PLAY to
,
SEARCH
, REPEAT ,
,
DISC SKIP
buttons