Changing Cds During Playback; Tray Number And Disc Display - Optimus CD-8250 Owner's Manual

42-5072.fm Page 13 Thursday, August 12, 1999 10:55 AM
Or, while the CD is stopped or
paused, press
desired track number appears.
To quickly locate a track during pro-
grammed play, hold down
until you reach the desired track.
Note: If you try to advance past the
CD's last track, the changer starts
counting again from Track 1. If you try
to move to before Track 1, the chang-
er starts counting back from the last
track.
CHANGING CDS DURING
PLAYBACK
To open the disc tray without stopping
playback, press
OPEN/CLOSE
the CD changer. The tray opens and
the current CD continues to play. You
can then change the CDs in the two
front holders.
Note: If you press
DISC SKIP
the tray while the disc tray is open, the
CD changer stops playing the current
CD and starts playing the next loaded
CD.
or until the
or
on
to rotate
Tray Number and Disc
Display
The display on the CD changer shows
the tray condition in the following way.
Disc number only – The CD changer
has not yet tried to play that tray, and
does not know whether the disc is
loaded or not.
Disc number with disc display – The
CD changer played the track on the
disc and knows a disc is loaded onto
that tray.
No display – The CD changer tried to
play that tray and knows that the tray
is empty.
13