Table of Contents
Advertisement
resume play, press CD again.
Note:
If you pause a CD for more then 5 minutes, the stereo turns
off.
5.
To remove a CD from the CD player, press (symbol).
Notes:
If you eject a CD while it is playing and do not remove it from
the CD player, the stereo automatically draws the CD back in and
starts playing again after about 5 seconds.
If you eject a CD then remove it from the CD player, the stereo
displays no cd (or the current time if you press CLOCK).
SELECTING A TRACK
To select a track on the loaded CD, press TUNE/SEEK TRACK (+) during play
to advance to the next track or TUNE/SEEK TRACK (-) to go back to the
start of the current track.
to select the next or previous track.
AUDIBLE SEARCH
To search for a particular section of a track, hold down TUNE/SEEK TRACK
(+) or TUNE/SEEK TRACK (-) during play.
either forward or backward (like cueing or reviewing a cassette tape).
When you hear the section you want, release TUNE/SEEK TRACK (+) or TUNE/
SEEK TRACK (-) to resume normal play.
SHUFFLE PLAY
You can set the stereo to randomly select and play tracks from the loaded
CD.
After each track plays, the stereo automatically selects another
track and plays it until you stop shuffle play.
To begin shuffle play, press SHUF/1.
To stop shuffle play, press SHUF/1 again to resume normal play.
disappears.
Note:
You can use audible search during shuffle play (see "Audible
Search" above).
REPEAT PLAY
You can set the stereo to repeat a single track on the loaded CD.
Repeatedly press TUNE/SEEK TRACK (+) or (-)
The stereo rapidly plays the CD
SHF appears during shuffle play.
EJ cd appears.
SHF
Advertisement
Table of Contents
