Table of Contents
Advertisement
As the radio scans each memory channel, P- and the channel number flash
and the frequency is displayed.
stereo returns to the original station.
To stop scanning when the radio pauses at a station you want to listen to,
press BND again during the pause.
CD PLAYER OPERATION
CAUTIONS:
Play only CDs that have this mark on them:
The CD player has a wide dynamic range.
turn your stereo's volume up too high during soft (low volume)
sections of a program, your speakers might be damaged when a
sudden loud passage occurs.
If the CD player is jolted during play, the rotation speed
might suddenly change or the CD player might make an usual
noise.
PLAYING A CD
1.
Press ON/OFF to turn on the stereo.
2.
Insert a CD (label side up) in the slot.
switches to CD play mode if the radio is playing and displays cd In.
Then the display shows (CD symbol), cd, and TR01, and the CD starts to
play from Track 1.
If a CD is already in the CD player ([CD symbol] appears on the
display), simply press CD to play the CD.
and the number of the track you last played, and the CD starts to play
from the point where you last stopped it.
After the stereo plays the entire CD, it automatically repeats all
tracks, starting with Track 1.
3.
Press + or - to increase or decrease the volume as desired.
Note:
See "Adjusting the Sound" above for information about changing
the stereo's other settings.
4.
To pause playback, press CD.
After scanning all memory channels, the
This is not a malfunction.
TR and the track number flash.
COMPACT
D I S C
DIGITAL SOUND
As a result, if you
The stereo automatically
The stereo displays cd, TR,
To
Advertisement
Table of Contents
