Table of Contents
Advertisement
WARNING:
To protect your hearing, do not listen at high volume levels.
Slowly increase the volume to a comfortable listening level.
AUDIO CONTROL SEL - Repeatedly press until bAS, TRE, bAL, or FAd and a
Notes:
When you adjust the balance toward the left speakers, L and a
number appear on the display.
the right speakers, R and a number appear.
When you adjust the fader toward the front speakers, F and a
number appear on the display.
the rear speakers, R and a number appear.
If bAS, TRE, bAL, or FAd and the number disappear before you press
+ or -, repeatedly press AUDIO CONTROL SEL until the setting you
want reappears, then repeatedly press or hold down + or - to set
it.
To set bass, treble, balance, and fader to their center (middle)
settings, hold down AUDIO CONTROL SEL for about 3 seconds until
the stereo beeps twice.
LOUD (12-2154 Only) - To increase the low ranges of sounds, repeatedly
FAVORITE SOUND MEMORY (12-2155 ONLY)
You can store your stereo's current volume, bass, treble, balance, and
fader settings into memory.
music you listen to and save that sound, so you can recall it later.
can store two FSM (favorite sound memory) settings.
Follow these steps to store an FSM setting.
number appear.
number appear on the display, then repeatedly press
or hold down + or - within 5 second to change the
stereo's bass, treble, balance, or fader settings.
press LOUD until ON appears.
repeatedly press LOUD until OFF appears.
The LOUD button is lit continuously while the
stereo is on.
(This section has been corrected. See Faxback Doc.
# 48535.)
This lets you select the best sound for the
When you adjust the balance toward
When you adjust the fader toward
To
turn off loudness,
You
Advertisement
Table of Contents
