Electrical Connections - JVC KW-AVX726 Instruction Manual

ELECTRICAL CONNECTIONS

PRECAUTIONS on power supply and speaker connections:
• DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the unit will be seriously damaged.
• BEFORE connecting the speaker leads of the power cord to the speakers, check the speaker wiring in your car.
Typical connections
Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit.
The leads of the power cord and those of the connector from the car body may be different in color.
1
Connect the colored leads of the power cord in the order specified in the illustration below.
2
Connect the antenna cord.
3
Finally connect the wiring harness to the unit.
Antenna terminal
DIGITAL OUT (see diagram )
Rear ground terminal
To external components
(see diagram
VIDEO OUT
(see diagram )
VIDEO IN
(see diagram
)
LINE IN
(see diagram
)
REAR OUT
(see diagram )
White with black stripe White
Left speaker (front)
* 1 Not supplied for this unit.
* 2
Before checking the operation of this unit prior to installation, this lead must be connected, otherwise power cannot be turned on.
Downloaded from Caradio-Manual.com Manuals
This terminal is used for controlling an external device by using the touch panel of this unit. This unit outputs the positional
information detected on the touch panel through the POSITION OUT terminal. Refer to the instruction manual of the external
device for details. JVC does not guarantee proper operations for the external device connected to the POSITION OUT terminal.
Position data output
(see diagram
)
SUBWOOFER—Only for KW-AVX726/KW-AVX724 (see diagram
Fan
15 A fuse
Black
)
Yellow *2
Red
Blue
Blue with white stripe
Orange with white stripe
Brown
Light green
Gray with black stripe Gray
Right speaker (front)
)
To metallic body or chassis of the car
To a live terminal in the fuse block connecting to the car battery (bypassing
the ignition switch) (constant 12 V)
To an accessory terminal in the fuse block
To automatic antenna if any (250 mA max.)
To the remote lead of other equipment (200 mA max.)
To car light control switch
To cellular phone system
Crimp connector
Green with black stripe Green
Left speaker (rear)
2
Ignition switch
Fuse block
To parking brake (see diagram )
Purple with black stripe Purple
Right speaker (rear)