Configuring The Nanoavr - miniDSP NANOAVR HD User Manual

3 C
ONFIGURING THE NANO
The nanoAVR is configured with the nanoAVR_BM plugin / user interface program. Once the nanoAVR is fully
configured, the user interface is no longer required, as source and preset selection can be done with the front
panel or a remote control – see
connected during use for real-time ("live") control of all settings in the nanoAVR.
This screenshot shows the nanoAVR_BM plugin with the key areas highlighted:
Note: during initial configuration of the nanoAVR, it is recommended that the connected HDMI output
device be muted.
miniDSP Ltd, Hong Kong / www.minidsp.com
AVR
Using the nanoAVR below. If desired, however, the user interface can remain
/ Features and specifications subject to change without prior notice
17