Download Print this page

GE RB524 Use And Care & Installation page 23

Advertisement

Oven Shelves
Clean the shelves with a mild abrasive cleanser.
After cleaning, rinse the shelves with clean water and
dry with a clean cloth.
To remove heavy, burned-on soil, soapy metal pads
may be used. After scrubbing, wash with soapy water,
rinse and dry.
Broiler Pan and Rack
After broiling, remove the broiler pan from the oven.
Remove the rack from the pan. Carefully pour out the
grease from the pan into a proper container. Wash and
rinse the broiler pan and rack in hot water with a
soap-filled or plastic scouring pad.
If food has burned on, sprinkle the rack with
detergent while hot and cover with wet paper
towels or a dishcloth. Soaking the pan will remove
burned-on foods.
The broiler pan may be cleaned with a commercial
oven cleaner. Do not use an oven cleaner on the rack.
CAUTION: Before replacing your oven lamp bulb,
disconnect the electric power for your range at
the main fuse or circuit breaker panel or pull the
plug. Be sure to let the lamp cover and bulb cool
completely before removing or replacing them. When
in use, light bulbs can become warm enough to break
if touched with a moist cloth or towel. When cleaning,
avoid touching warm lamps with cleaning cloths if the
lamp cover is removed.
The oven lamp (bulb)
is covered with a glass
removable cover which
is held in place with a wire.
Remove the oven door,
if desired, to reach the
cover easily.
some models)
(on
(on some models)
0
@Q
Both the broiler pan and rack can also be cleaned in
the dishwasher.
Do not store a soiled broiler pan and rack anywhere
in the range.
Do not clean the broiler pan or rack in the self-
cleaning oven.
To remove:
Hold your hand under the cover so it doesn't fall
when released. With fingers of the same hand,
firmly push back the wire until it clears the cover.
Lift off the cover.
DO NOT REMOVE ANY SCREWS.
Replace bulb with 40-watt home appliance bulb.
To replace cover:
Place it into the groove of the lamp receptacle. Pull
the wire forward to the center of cover until it snaps
in place. When in place, the wire holds the cover
firmly. Be certain the wire is in the depression in the
center of the cover.
Connect electric power to the range.
23

Advertisement

loading

This manual is also suitable for:

Rb532Rb533Rb536Rb525Rb632Rb526 ... Show all