Disassembly And Assembly; Disassembly - Samsung 2263UW Service Manual

3. Disassembly and Assembly

This section describes the disassembly and reassembly sequences for this monitor.
Warning: As this monitor has parts that are sensitive to static electricity, be careful when handling them.

3-1. Disassembly

Caution: 1. Turn the monitor off before beginning the disassembly process.
2. When disassembling the monitor, do not use any metal tools except for the provided jig.
3. Remove the signal cable and the power cord before beginning the disassembly.
Description
▶STAND
1. Place a soft cloth on the floor and place the
monitor on it so that the front of the monitor is on
the cloth.
Caution : If you do not tilt the stand and use too
much force to remove it, the connection
pin may break.
2. Remove the two screws at the bottom of the
monitor. Insert your hand into the hole between
the two screw holes and lift up the back cover.
SHIELD TCO-LAMP
▶
3. Slide the Shield TCO-Lamp away from the
monitor. Lift it up carefully and separate it from
the monitor.
3. Disassembly and Assembly
Photo Screws
3-1