Quidway S5000 series Operation Manual page 10

Operation Manual - VLAN
Quidway S5000 Series Ethernet Switches
II. Networking diagram
Switch A
Figure 2-1 GVRP configuration example
III. Configuration procedure
Configure Switch A:
# Enable GVRP globally.
[Quidway] gvrp
# Set GigabitEthernet0/1 as a Trunk port and allows all the VLANs to pass through.
[Quidway] interface gigabitethernet0/1
[Quidway-GigabitEthernet0/1] port link-type trunk
[Quidway-GigabitEthernet0/1] port trunk permit vlan all
# Enable GVRP on the Trunk port.
[Quidway-GigabitEthernet0/1] gvrp
Configure Switch B:
# Enable GVRP globally.
[Quidway] gvrp
# Set GigabitEthernet0/2 as a Trunk port and allows all the VLANs to pass through.
[Quidway] interface gigabitethernet0/2
[Quidway-GigabitEthernet0/2] port link-type trunk
[Quidway-GigabitEthernet0/2] port trunk permit vlan all
# Enable GVRP on the Trunk port.
[Quidway-GigabitEthernet0/2] gvrp
GE0/1 GE0/2
Switch B
2-6
Chapter 2 GARP/GVRP Configuration