Selecting Main Or Sub Channel-Dual Mono; Setting The Digital Input Terminals; Memorizing The Volume Level For Each Source - JVC rx-7032vsl Instruction Manual

7 Low frequency effect attenuator—LFE ATTENUATE
If the bass sound is distorted while playing back software
encoded with Dolby Digital or DTS, set the LFE level to
eliminate distortion.
Select one of the following:
0dB: Normally select this.
− − − − − 10dB: Select when the bass sound is distorted.
Selecting main or sub channel—DUAL MONO
When the playback source is Dual Mono, you can select which,
or both channels to listen to.
Select the playback sounds (channel).
MAIN: Select to play back the main channel (Ch1).*
Signal indicator "L" lights up while playing back this
channel.
SUB: Select to play back the sub-channel (Ch2).*
Signal indicator "R" lights up while playing back this
channel.
ALL: Select to play back both the main and sub-channels
1
(Ch1/Ch2).*
Signal indicators "L" and "R" light up while playing
back these channels.
Notes:
• The Dual Mono format is not identical with bilingual
broadcasting for TV programs. So this setting does not take
effect while watching such bilingual programs.
* 1 Dual Mono signals can be heard from the following speakers—
L (left front speaker), R (right front speaker), and C (center
speaker)—with respect to the current Surround setting.
Without Surround
Dual Mono
Setting
L R L
MAIN Ch 1 Ch 1 —
SUB Ch 2 Ch 2 —
ALL Ch 1 Ch 2 — Ch 1+Ch 2 — Ch 1+Ch 2 Ch 1+Ch 2
1
1
With Surround Activated
Center speaker setting
SMALL/LARGE NONE
C R L R
Ch 1 — Ch 1 Ch1
Ch 2 — Ch 2 Ch 2

Setting the Digital Input Terminals

When you use the digital input terminals, register which components
you have connected to the digital input terminals.
7 Digital coaxial terminal—DGTL IN COAX
Set the component connected to the digital coaxial terminal
(DIGITAL IN 1).
DVD (initial setting), CD, TV (or DBS*) or CDR.
* If you have changed the source name from "TV" to "DBS,"
"DBS" appears (see page 18).
7 Digital optical terminals—DGTL IN OPTICAL
As you set the components connected to the digital coaxial
terminal (DIGITAL IN 1), the optical terminals (DIGITAL IN 2
– 4) will be automatically fixed to connect the components listed
below.
When "DIGITAL IN 1 (DGTL IN COAX)" is set to "DVD"
2: CD 3: TV (or DBS*)
When "DIGITAL IN 1 (DGTL IN COAX)" is set to "CD"
2: DVD 3: TV (or DBS*)
When "DIGITAL IN 1 (DGTL IN COAX)" is set to "TV" or
"DBS"*
2: DVD 3: CD
When "DIGITAL IN 1 (DGTL IN COAX)" is set to "CDR"
2: DVD 3: CD
* If you have changed the source name from "TV" to "DBS,"
"DBS" appears (see page 18).

Memorizing the Volume Level for Each Source

This unit memorizes some settings separately for each source.
In addition, you can store the volume level for each source with the
other memorized settings—One Touch Operation.
7 One Touch Operation—ONE TOUCH OPE
Select one of the following:
ON: Select to store the volume level separately for each
source. (The ONE TOUCH OPERATION indicator lights
up on the display.)
This receiver memorizes the volume level—
• when you change the source, or
• when you change the source name.
OFF: Select this not to store the volume level.
To recall the volume level
With the ONE TOUCH OPERATION indicator lit, the volume
level for the currently selected source is recalled when the
source is selected.
To cancel the One Touch Operation
Set One Touch Operation to "OFF" so that the ONE TOUCH
OPERATION indicator goes off.
4: CDR
4: CDR
4: CDR
4: TV (or DBS*)
28