Step 1 Connection - Panasonic DMR-ES18 Operating Instructions Manual

STEP 1 Connection

• Before connection, turn off all equipment and read the appropriate operating instructions.
• Select the connection pattern that matches your environment from patterns A-B. Confirm connections not listed below with your
dealer.
For Middle East and South Africa
BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 2 BEFORE CONNECTION.
When the unit is not to be used for a long time
To save power, unplug it from the household mains socket. This unit consumes a small amount of power, even when it is turned off.
[approx. 2 W (Power Save mode)]
When "Power Save" is set to "On", the "Quick Start" function does not work.
Connecting a television
To the aerial
Aerial
cable
RF coaxial cable
(included)
Connecting to a television with 21-pin Scart terminal
You can also connect with the AV1 terminal on this unit using the 21-pin Scart cable.
If your television is equipped with RGB input capability, by connecting with a fully wired 21-pin Scart cable you can see video using RGB output
on this unit.
Required setting
"AV1 Output" in the Setup menu (Ô 39)
RQT9053
10
Downloaded From Disc-Player.com Panasonic Manuals
Television's rear panel
VHF/UHF
RF IN
Audio/video cable
(included)
For Saudi Arabia
AC mains lead (included)
AUDIO IN VIDEO
R L IN
Connect only after all other connections
are complete.
For Middle East and South Africa
Red White Yellow
Use the AC mains lead that matches the
socket for the area you live in.
For Asia
AC mains lead with a label is for Thailand.
AC mains lead without a label is for areas
other than Thailand.
Other connections (Ô 12)
Red White Yellow
To household mains socket
(AC 220 to 240 V, 50/60 Hz)
Cooling fan
This unit's rear panel