Table of Contents
Advertisement
Operating Instructions
(continued)
FAULT CODES:
If the display reads "HS", "AS", "ES", "CS" or "OS", a sensor has failed. Contact your Authorized Service Center.
TO CHANGE TEMPERATURE DISPLAY:
DO THIS:
PRESS AND HOLD THE
UP/DOWN BUTTONS
TOGETHER FOR 3 SECONDS
TO TURN UNIT OFF:
DO THIS:
PRESS
ON/OFF BUTTON
Operating Instructions
YOU WILL SEE:
Note: The control is capable of displaying temperature in
degrees Fahrenheit or degrees Celsius.
YOU WILL SEE:
Note: If the unit is turned off in heat mode (if applicable) or
fan only mode, it will return to the same setting when it is
turned on again. When the unit is turned off in cool or energy
saver(econ) mode, it will run in energy saver(econ) mode
when it is turned on again, but the setting of temperature
and fan speed will remain.
9
Advertisement
Table of Contents
