Table of Contents
Advertisement
S E T U P
M E N U
O P T I O N S
Video Setup Page
1. Sharpness: To set the sharpness of video output. Sharpness level can be set with the
following options:
•
Sharp – Enable edge enhancement. Video details are the sharper. May cause slight white
line etching around objects.
•
Soft – Soften edges. Video appears to be smoother but may cause slight loss of details.
•
Off – Turn off edge enhancement completely.
2. Brightness: To adjust the brightness (black level) of the video output.
•
Press the SELECT button to show the Brightness scale, and then use the LEFT/RIGHT
ARROW buttons to adjust.
•
Press the SELECT button to confirm the new setting.
3. Contrast: To adjust the contrast (white level) of the video output.
4. Hue: To adjust the hue (tint) of the video output.
5. Saturation: To adjust the saturation (color intensity level) of the video output.
6. Gamma: To adjust the Gamma (intensity distribution to video signal level) of the video output.
The available settings are High, Medium, Low and Off.
7. Color Space: To select the color space for the HDMI output. The available options are:
•
Auto – Allows the DVD player to automatically select the best color space based on
capability information collected from the TV display. This is the preferred selection.
•
YCbCr 4:4:4 – Forces YCbCr 4:4:4 color space. If you select this option please make sure
that your TV is configured to accept YCbCr 4:4:4 signals, otherwise the video color will be
incorrect.
•
RGB – Forces RGB color space. If you select this option please make sure that your TV is
configured to accept RGB signals, otherwise the video color will be incorrect.
Preference Page
The Preference Page can only be accessed when playback is completely stopped, or when there is no
disc in the DVD player.
1. TV Type: To set the output video system (PAL/NTSC) to match the type of TV. The options
are:
32
Advertisement
Table of Contents
