Installing The Fuel Tank And The Fuel Line; Installing The Discharge Tunnel - Toro 22188 Operator's Manual

3. Slide the bag support rod through the second
from the top mounting holes in the handle and
secure each end with a cap locknut (Figure 3).
4. Use a cable tie to secure the control cables to
the left handle below the bag support rod.
Step
2
Installing the Fuel Tank and
the Fuel Line
Parts needed for this step:
2 Self-tapping screw
1 Fuel tank
Procedure
1. Slide the end of the fuel line onto the elbow
fitting (Figure 4).
Figure 4
1. Fuel tank
2. Elbow tting
2. Secure the fuel line in place with the fuel line
clamp (Figure 4).
3. Slide the plastic clips on the front of the fuel
tank onto the fuel tank mount (Figure 5).
3. Fuel line
4. Fuel line clamp
Figure 5
1. Plastic clip (2)
4. Secure the bottom of the fuel tank to the
fuel tank bracket by installing the self-tapping
screws from the bottom. Do not overtighten
the screws.
Step
3
Installing the Discharge
Tunnel Plug
Parts needed for this step:
1 Discharge tunnel plug
Procedure
1. Open the discharge door by pulling forward on
the handle and moving it rearward (Figure 6).
Hold the discharge door handle to prevent the
spring-loaded door from closing while you
insert the plug.
9