EnGenius DuraFon-UHF-HC User Manual page 56

2. Caller ID service is required from your local phone company in order to
receive phone numbers, names and time stamps on incoming calls. The
Received and Missed Call Logs will register no incoming calls if caller ID
service is not available.
3. The caller ID feature may not be supported by all PBX or Key systems' analog
ports, check with your equipment provider
5. Press 4 to set sound-related settings:
a. Press 1
options: Low, Medium, High, Vibrate, Vibrate and Ring, Off. Press
(left soft key) to save selection. The default setting is High.
b. Press 2
options: 0, 1, 2, and 3. Press
default setting is 0.
c. Press 3
key scroll through 3 options: High, Low, and Off. Press
to
key) to save selection. The default setting is Low.
d. Press 4
options: 0, 1, 2, and 3. Press
default setting is 0.
6. Press 5 to change handset settings:
a. Press 1

Use
feature. The default setting is Off.
 If "On" is selected, the handset is prompted to enter a prefix, up to 14
digits.
 To enter a prefix, use
edit.
 When the dialing prefix feature is turned on, for each outgoing phone
call (except during redial or dialing by pressing
the user whether to use the dialing prefix. The current prefix will be
displayed. Press
the number or
 This feature is especially useful for access code, calling card, and credit
card calls.
b. Press 2
c. Press 3
Select.
d. Press 4
 Press
to select ringer volume:
to select ringer tone:
to select the key volume when a key is pressed:
to select the key tone:
to set the dialing prefix:
the Up/Down key to scroll and select on or off for the dialing prefix
YES
NO (right soft key) to leave it out..
to select a group. See Handset group Subscription.
to turn Base Select on or off. The default setting is Off. See Base
to clear the call logs and phonebook:
1 and confirm to delete the entire phonebook.
the Up/Down key
Use
the Up/Down key
Use
SAVE (left soft key) to save selection. The
the Up/Down key
Use
SAVE (left soft key) to save selection. The
DELETE (right soft key) and the Up/Down key to
(left soft key) add the prefix to the beginning of
~56~
scroll through six
to
SAVE
scroll through four
to
the Up/Down
Use
SAVE (left soft
scroll through four
to
the LCD will ask
)