Advanced Registration (Register To Pro Base Only) - EnGenius DuraFon-UHF-HC User Manual

Press and hold the base's
2.
L1, L2, L3, and L4 LEDs come on.
3. Press 1
station will assign a handset ID between 10 and 99. The assigned ID will
be displayed on the handset LCD, indicating successful registration.
4. Repeat these steps for all additional handsets.
Notes:
The first two handsets registered will be given IDs 10 and 11,
1.
which gives them administrator privileges.
Base 00 is a primary base. All handsets must register to Base
2.
00.
De-registration
You can de-register a handset from a base. De-registration will reset the handset ID
to 00, erase the system security code, and free up the old ID for future registration.
After deregistration, the handset will not be able to use the base to make or receive
phone calls, nor can it use the intercom to reach other handsets.
1. Press MENU
2. Press 6
3. Press and hold the base's
LED come on
4. Press 2
successful de-registration, the handset will display ID "00."
Notes:
3. The base has a 30-second registration timeout (starting from
depression of the
registration timeout (starting from the time registration or de-
registration option has been selected). The base and handset
will automatically exit registration mode after timeout.
Repeat registration or de-registration process if unsuccessful.
4.

Advanced Registration (Register to PRO base only)

Advanced registration functions can be performed with administrator handsets (ID
10 and 11) only.
Administrator handsets can be used for advanced registration functions as long as
on the handset to complete the registration process. The base
(right soft key) on the handset.
on the handset to enter the handset registration menu.
on the handset to complete the de-registration process. Upon
REG
REG (Registration) button for 2 seconds until the
REG button for 2 seconds until L1, L2, L3, and L4
button). The handset has a 12-second
~35~