Standard Disassembly Drawings - Samsung DV409SEL Service Manual

3-2. STANDARD DISASSEMBLY DRAWINGS

To avoid risk of electrical shock, personal injury or death, disconnect the power to the Clothes Dryer.
► This is a standard disassembly diagram and may differ from the actual product.
Use this material as a reference when disassembling and reassembling the product.
Part
Top Cover Removal
Main PCB Removal
10 _ Removal and Reassembly
Figure
1. Disconnect the power supply and to the unit
2. Remove 2 screws from the Top- Cover
3. Slide Top Cover towards the rear and lift from the
1. Disconnect the power supply and to the unit
2. Remove the Top Cover
3. Remove 3 screws from the frame+plate
4. Remove the Wire holder
5. Remove the Housings
6. Remove 1 from the Holder PCB
Description
unit.
Scratch and impact to the top cover is
prohibited.
Shaking the heater terminal side ways to pull it
out is prohibited.