Remove The Tuner Unit; Remove The A-Board - Panasonic TX-P42S10B Service Manual

8.4.

Remove the Tuner unit

1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (A1, A7, A8, A11, A12 and
A25).
3. Disconnect the flexible cables (A20, A31, A32 and A88).
4. Remove the screws (×2
Tuner unit.
, ×1
) and remove the
8.5.

Remove the A-Board

1. Remove the Tuner unit. (See section 8.4.)
2. Remove two EDGE SADDLES at top of case.
Twist the EDGE SADDLE to press up at the back and
pull down the front side.
3. Remove the screws (×4
Caution :
Press up the case not to touch the leg of clamper to the A-
board.
Pay attention two metal projection
removal and assemble.
21
) and remove the A-Board.
from back side when