Others - Midea MD-CCM04/E Owner's Manual

How to change "
to " " ?
There are two methods:
ADD
Reset
select °C or °F
Pressing the "RESET" button will
clear the information of weekly timer.
EDIT
Always press
The example of DELAY
The plan setted as follows:
period
Period 2
Period 1
Time
Start time 09:00 14:30
End time 11:30 17:30
If you want the unit overrides 1/2 hour after
period 1. Just press " Delay " button once
during 09:00 to 11:30.
But if you set the delay time(1/2 hour) out
of the period you set (like during 11:31 to
14:30), the unit will override 1/2 hour at once.
Remark:When finishing the function, the
unit will operate following the plan you set.
10
" to " ",or "
CONFIRM
+
QUERY
select °C or °F
Period 3
Period 4
19:00 00:00
21:30 00:00
How to set mode/fan/temperature
"
under the OFF status?
Firstly, press the Mode button to enter the
setting. Then it will display the mode/ fan/
temperature before OFF. At this time, you
could set the mode/ fan/ temperature you
want.
And When you finish the setting, press the
Confirm button to send. The air conditioner
will start with the information you set.
What is the temporary setting?
Weekly timer is operating:
When the unit operated with the Weekly
timer, Any operations of mode/ fan speed/
temperature are called temporary setting.
When the wire controller displays Currently
icon, temporary setting has been effective.
Under the main interface, pressing "cancel"
button will cancel the temporary setting.
" Currently " icon will disappear and the
mode/ fan speed/ temperature parameters
of temporary setting will be saved. Then the
unit operated with the Weekly timer.
Weekly timer is off:
Temporary setting is always effective.