Using Method; Set Time - Midea MD-CCM04/E Owner's Manual

Delay button:
press this button once, display
wait 3 seconds to confirm. It means the
unit will override 1 hour;
press this button twice, display
wait 3 seconds to confirm. It means the
unit will override 2 hours;
press three times, display
3 seconds to confirm It means to cancel
the setting;
cycling display as follows: 1h-2h-0h-1h.
When the override function does not go
into effect, the delay time can be
changed through the setting. But if the
function has gone into effect, any opera-
tion for the delay button is not effective
and the delay button is only for querying
the delay time you set.
Remark : If weekly timer is off, delay
button is ineffective.
ON/OFF button:
Push the button at the condition of OFF,
the OPERATION lamp lights, and the
wire controller enters into ON operation,
simultaneously sends the information of
operation mode, fan speed, temperature
etc.
and
" "
and
" "
and wait
" "
Push the button at the condition of ON,
the OPERATION lamp extinguishes,
simultaneously sends the OFF. If having
set DELAY, the wire controller will cancel
this setting before entering into OFF,
close the concern indicator, and then
send the OFF information.

7. USING METHOD

SET TIME

Under the normal display interface
TIME
or
ADD REDUCE
CONFIRM
NOTE
In operating, Press the key "CANCEL",
to turn back to the previous step or the
normal display interface.
set hour
or
REDUCE
ADD
set minute
CONFIRM
set done
7