Midea MD-CCM04/E Owner's Manual page 10

Date button: press the button, and
then enter the date of calibration, the
calibration sequence year--month--day-
-week .
Jump to next setparameters when press
the Confirm button every time, set the
scope of date (1-31) is not checking it
without date. (Press Cancel that can
return to the
changes)
Timer on/off button:Press this button,
can turn off the weekly timer function.
Reset button:When press this button,
the system will clear the information of
weekly timer and delay,come into normal
display state and need to carry out some
initial setting (in page 9: SET PLAN_ ).
Lock button:press this button,weekly
timer come into lock mode, Press LOCK
again,lock mode is unchained at once.
Weekly timer lock mode state can not be
canceled when weekly timer has come
back to supply power after interruption of
power supply.
Cancel button: It is for not saving and
retreating, or to cancel the temporary
6
previous parameter
setting (Details in page 10).
Query button: Press "Query", display
present indoor temperature value, press
"Cancel" to back
"Reduce" to select the day you want to
query from "Sun" to "Sat", press
"Confirm". Then
"Reduce" to select the period you want to
query from "1" "4"
"Cancel" to back or select other periods.
Reduce button: It is for reducing to
numbers and moving left or up to the
other.
Add button: It is for adding to numb
ers, and moving right or down to the
other.
Confirm button: It is for confirm
selection.
Time button: press this button, then
press "Add" or "Reduce" to adjust the
hours value press "Confirm" to adjust
minutes: press "Add" or "Reduce" to
adjust the minutes
"Confirm" to save and back.
press "Add " or
press "Add " or
period. Press
value press