Bosch MAXX 5 Operating And Installation Instruction page 34

Signal
Signal for switching
buttons on and off
Signal for programme
status
34
Downloaded from www.Manualslib.com
The acoustic signal indicates:
- that the additional functions (buttons) have been
- individual programme statuses (e.g. start of
q Press the
i When the additional functions are switched on, a
The signal can be switched on and off and the volume
set before the start or after the end of the programme.
q Press the
q Release the button when the required volume is
manuals search engine
switched on or off,
programme, end of programme), operating errors
and faults.
M
button and set the programme
selector to Cottons y cold . Hold down the
M
button until the signal is emitted. The selected
setting is stored.
long signal is emitted; when the additional function
is switched off, the signal is short. The volume of
the signal cannot be changed.
v
button and hold down until the signal
is emitted and the volume of the signal changes.
reached.
The selected setting is stored.