Table Of Contents - Toro Recycler 20654 Operator's Manual

Figure 4
Note: Use the upper hole in the handle (Figure 4).
3. While holding the left lower handle end in position, slip
the cable guide onto the right lower handle end, push
the handle end and cable guide inward, and install it
onto the pin on the right handle bracket (Figure 5).
Figure 5
4. Insert the cable into the cable anchor on the left handle
bracket (Figure 6).
Figure 6
5. Attach the upper handle onto the lower handle.
Note: Ensure that the handle knobs are on the inside
of the handle (Figure 7).
Figure 7
6. Tighten the handle knobs as tight as you can (Figure 8).
Figure 8
2. Filling the Crankcase with
Oil
Important: Your mower does not come with oil in
the engine.
1. Remove the dipstick (Figure 9).
Figure 9
2. Slowly pour oil into the oil fill tube to raise the oil level
to the Full mark on the dipstick. Do not overfill.
3. Install the dipstick securely.
Important: Change the engine oil after the first 5
operating hours; change it yearly thereafter. Refer
to Changing the Engine Oil.
Max. fill: 0.59 l, type: SAE 30W detergent oil with
an API service classification of SF, SG, SH, SJ, SL, or
higher.
5