Usb 3.0 Connector (20-1 Pin Usb3_12) - Asus E3-PRO V5 User Manual

• System warning speaker (4-pin SPEAKER)
This 4-pin connector is for the chassis-mounted system warning speaker. The speaker
allows you to hear system beeps and warnings.
• ATX power button/soft-off button (2-pin PWR_SW)
This connector is for the system power button.
• Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system reboot without
turning off the system power.
9.

USB 3.0 connector (20-1 pin USB3_12)

This connector allows you to connect a USB 3.0 module
for additional USB 3.0 front or rear panel ports. With an
installed USB 3.0 module, you can enjoy all the benefits
of USB 3.0 including faster data transfer speeds of up
to 5Gbps, faster charging time for USB-chargeable
devices, optimized power efficiency and backward
compatibility with USB 2.0.
10. USB 2.0 connector (10-1 pin USB1112)
This connector is for USB 2.0 ports. Connect the USB module cable
to any of this connector, then install the module to a slot opening at
the back of the system chassis. These USB connectors comply with
USB 2.0 specifications and supports up to 480Mbps connection
speed.
Never connect a 1394 cable to the USB connectors. Doing so
will damage the motherboard!
11. Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/
PDIF) port. Connect the S/PDIF Out module cable to this connector,
then install the module to a slot opening at the back of the system
chassis.
12. Serial port connector (10-1 pin COM)
This connector is for a serial (COM) port. Connect the serial port
module cable to this connector, then install the module to a slot
opening at the back of the system chassis.
ASUS E3-PRO V5
USB3_12
GND
IntA_P2_D+
IntA_P1_D+
IntA_P2_D-
IntA_P1_D-
GND
GND
IntA_P2_SSTX+
IntA_P1_SSTX+
IntA_P2_SSTX-
IntA_P1_SSTX-
GND
GND
IntA_P2_SSRX+
IntA_P1_SSRX+
IntA_P2_SSRX-
IntA_P1_SSRX-
USB3+5V
USB3+5V
PIN 1
USB1112
PIN 1
SPDIF_OUT
COM
PIN 1
1-5