Do you have a question about the EM 3 and is the answer not in the manual?
Questions and answers
Agris Meinards
March 15, 2025
Hi!
How to fix error 1 on EM3. By turning on it starts to **** and shows an error 1?
1 comments:
Mr. Anderson
March 15, 2025
The error E1 on the Christopeit Sport EM 3 hometrainer causes the device to stop functioning and emit a beeping sound. Possible steps to fix this issue include:
1. Check all cable connections – Ensure that all plugs and connectors are securely attached. 2. Restart the device – Turn off the hometrainer, unplug it from power, wait a few minutes, and then restart it. 3. Test different programs – Some users reported that Program 14 displays values but does not adjust resistance. Try other programs to see if the issue persists. 4. Contact customer support – If the issue continues, reach out to Christopeit Sport for spare parts or further troubleshooting.
If none of these steps resolve the problem, the issue may require professional repair.
Page 1
Heimsport-Trainingsgerät Ergometer EM 3 9808 C (schwarz/silber) Montage- und Bedienungsanleitung für Bestell-Nr. 98081 C (weiß/türkis) Assembly and exercise instructions for Order No. Notice de montage et d’utilisation du No. de commande Montage- en bedieningshandleiding voor Bestellnummer...
Inhaltsübersicht Contents Page 1. Wichtige Empfehlungen und Sicherheitshinweise Seite 2. Einzelteileübersicht Seite 3. Stückliste Seite 4 - 5 4. Montageanleitung mit Explosionsdarstellungen Seite 6 - 7 5. Computeranleitung Seite 9 - 12 Sommaire Page 6. Trainingsanleitung Seite 12 Sehr geehrte Kundin, sehr geehrter Kunde Wir gratulieren Ihnen zum Kauf dieses Heimsport-Trainingsgerätes und Inhoudsopgave Pagina 34...
Stückliste - Ersatzteilliste Wenn ein Bauteil nicht in Ordnung ist oder fehlt, oder wenn Sie in Zukunft ein Ersatzteil benötigen, wenden Sie sich bitte an uns. EM 3 Best.-Nr. 9808 C, 98081 C Technische Daten: Stand: 01. 03. 2013 Adresse:...
Montageanleitung Bevor Sie mit der Montage beginnen, unbedingt unsere Empfehlungen und Sicherheitshinweise beachten! Entnehmen Sie alle Einzelteile der Verpackung, legen Sie diese auf den Boden und kontrollieren grob Sie die Vollzähligkeit anhand der Montagebilder. Dieses soll Ihnen den Zusammenbau des Gerätes erleichtern und schneller durchführbar machen.
Page 7
Schritt 4: Montage des Computers (1) am Stützrohr (7). 1. Stecken Sie den Stecker des Computerkabelstranges (6), der oben aus dem Lenkerstützrohr (7) ragt, in das auf der Rückseite des Computers (1) befindliche Kabel ein. 2. Schieben Sie den Computer (1) auf die dafür vorgesehene Platte des Lenkerstützrohres (7) (ohne die Kabelverbindung einzuquetschen), und schrauben Sie den Computer (1) mittels der Schrauben (28) am Stützrohr (7) fest.
Page 8
Schritt 7: Anschluss des Netzgerätes 1. Stecken Sie den Stecker des Netzgerätes (77) in die entsprechende Buchse (78) am hinteren Ende der Verkleidung des Gerätes. 2. Stecken Sie danach das Netzgerät (77) in eine vorschriftsmäßig installierte Steckdose (230V/50Hz). Schritt 8: Kontrolle 1.
COMPUTER ANLEITUNG 9808 C, 98081 C blinkt. Mit der +/- Taste geben Sie die Werte ein und durch erneutes Drücken der „E“ –Taste werden diese bestätigt. Gleichzeitig springt die Blinkanzeige in das nächste Eingabefeld. „F“ : Im Normalfall zeigt der Computer die Geschwindigkeit (SPEED), Entfernung (DIST) und Kilokalorien (CAL) an.
Page 10
jeder Zeitbalken 3 min Training, d.h. nach 3 Minuten springt die Blink-Anzeige von Balken 1 auf Balken 2 usw. bis gesamt 30 min. Wird das Programm zwischenzeitlich mit der S-Taste gestoppt, bleibt die Zeit stehen, um von dort aus nach erneuten Drücken der S- Taste wieder weiterzuzählen. PULSOBERGRENZE/BMI/ALTER: Verfügbar in den Programmen 1- 14, Pulsprogrammen und individuellen Benutzerprogrammen).
Page 11
Programm 7 (Intervall) Programm 8 (Wellen) Programm 9 (Plateau) Programm 10 (Anstieg) Programm 11 (Intervall) Programm 12 (Hügel) Programm 13 (Sprint) Programm 14 (Watt) Körperfettprogramm Zielpulsprogramm Pulsprogramm (55% max. Puls) Pulsprogramm (65% max. Puls) Pulsprogramm (75% max. Puls) Pulsprogramm (85% max. Puls) Benutzerprogramm U1 Benutzerprogramm U2 Benutzerprogramm U3...
Garantiebestimmungen Abweichungen vom tatsächlichen Puls kommen kann. Bei einigen wenigen Personen kann es zu Fehlfunktionen der Handpulsmessung kommen. Sollten Sie Schwierigkeiten mit der Handpulsmessung haben, so empfehlen wir Die Garantie beginnt mit dem Rechnungs- bzw. Auslieferdatum und beträgt Ihnen die Verwendung eines Cardio – Brustgurtes mit Puls-Uhr. 24 Monate.
Contents 1. Summary of Parts Page 3 - 4 2. Important Recommendations and Safety Information Page 13 3. Parts List Page 14 - 15 4. Assembly Instructions With Exploded Diagrams Page 16 - 17 5. Computer instructions Page 19 - 21 6.
Page 14
Parts list – List of spare parts Please contact us if any components are defective or missing, or if you need any spare parts or replacements in future. EM 3 order No. 9808 C, 98081 C Technical data: Issue: 01. 03. 2013...
Page 15
Illustration Designation Dimensions Quantity Attached to ET number ET number illustration No. 9808 98081 Bolt M6x15 39-9911 39-9911 Belt 33+52 36-9808-12-BT 36-9808-12-BT Washer 12/24 39-10062 39-10062 Adjustment Motor 36-9212-08-BT 36-9212-08-BT Screw M5x60 39-10406 39-10406 Tension wire 36-9808-36-BT 36-9808-36-BT Saddle adjustment knob 36-9211-18-BT 36-9211-18-BT Bushing...
Assembly Instructions Remove all the separate parts from the packaging, lay them on the floor and check that all are there on the basis of the step drawings in these instructions for assembly and use. Please note that a number of parts have been connected directly to the main frame and preassembled.
Page 17
Step 4: Attach the computer (1) at handlebar support (7). 1. Push the plug of the connecting cable (6) projecting from the handlebar support (7) into the associated socket of the computer (1). 2. Place the computer on the plate provided for it on the handlebar support (7) and attach it with the screws (28).
Page 18
Step 7: Attach the power. 1. Please insert the plug of adaptor (77) to the jack of chain guard (78). 2. Please insert the plug of adaptor (77) to the jack of wall power (230V- 50Hz). Step 8: Checks 1. Check the correct installation and function of all screwed and plug connections.
Page 19
Computer Instructions for 9808 , 98081 TIME/HEIGHT/WEIGHT Display: Indicates only 1 value of TIME, HEIGHT, or WEIGHT displayed depending on the programs. RPM/SPEED/KMH Display: Indicates only 1 value of RPM, SPEED, or KMH displayed depending on the programs. DISTANCE/ODO/FAT% Display: Indicates only 1 value of DISTANCE (ODO) or FAT% displayed depending on the programs.
Page 20
C. Programs Selection: value of TIME counting down, each interval is the value of setup There are totaly 24 programs with 1 Recovery including 1 TIME divided by 10. For example, if the time value is setup Manual Program, 12 Preset Programs, 1 Body Fat Program, to 40 minutes, each interval will be 40 minutes divided by 10 5 Heart Rate Control Programs, 4 User Setting Programs, 1 intervals (40/10=4).
Page 21
Program U2 Program U3 Program U4 • Operation Instructions profiles for each. Press „ENTER“ key to select GENDER, HEIGHT, WEIGHT, and AGE. Then, press (+) or (-) key to A. Exercising With a Specific Goal: adjust the values. After pressing „START/STOP“ key to 1.
Training instructions You must consider the following factors in determining the amount of trai- ning effort required in order to attain tangible physical and health benefits: 1. Intensity: The level of physical exertion in training must exceed the level of normal exertion without reaching the point of breathlessness and / or exhaustion.
Sommaire 1. Aperçu des pièces Page 2. Recommandations importantes et règles de sécurité Page 3. Nomenclature Page 24 - 26 4. Notice de montage avec écorchés Page 26 - 28 5. Manuel d’utilisation du calculateur électronique Page 29 - 32 6.
Page 24
Liste des pièces- Liste des pièces de rechange Si une pièce n’est pas correcte, s’il manque une pièce ou si vous avez besoin d’une pièce de rechange à l’avenir, veuillez vous EM 3 N° de commande 9808 C, 98081 C adresser à : Caractéristiques techniques : Version du : 01/ 03/ 2013 •...
Page 25
Schéma Désignation Dimensions Quantité Monté sur Numéro ET Numéro ET n° en mm Unités schéma n° 9808 98081 M6x15 39-9911 39-9911 Câble plat 33+52 36-9808-12-BT 36-9808-12-BT Rondelle 12/24 39-10062 39-10062 Servomoteur 36-9212-08-BT 36-9212-08-BT M5x60 39-10406 39-10406 Câble de transmission 36-9808-36-BT 36-9808-36-BT Fermeture à...
Page 26
Notice de montage Il est strictement conseillé d’observer nos recommandations et consignes de sécurité avant de commencer le montage ! Avant de commencer avec le montage, respectez absolument nos recommandations et consignes de sécurité ! Retirez tous les éléments du carton et préparez-les de manière ordonnée pour le montage. Etape n°...
Page 27
Etape n° 4: Montage de l’ordinateur (1). 1. Branchez le connecteur du faisceau de câbles (6) du calculateur qui dépasse du tube de support du guidon (7) dans la prise qui se trouve au dos du calculateur (1). 2. Insérez l’ordinateur sur la plaque prévue à cet effet sur le tube d’appui du guidon (7) et vissez le calculateur (1) avec des vis (28).
Page 28
Etape n° 7: Branchement de l’appareil d’alimentation électrique (77). 1. Introduisez la fiche de l’appareil d’alimentation électrique (77) dans la prise adéquate à l’extrémité (78) arrière du revêtement. 2. Enfichez ensuite l’appareil d’alimentation électrique (77) dans une fiche femelle (230V/50Hz). Etape n°...
Page 29
Guide d’utilisation de l’ordinateur 9808 C, 98081 Les touches ‘’ + ‘’ et ‘’ – ‘’ vous permettent de modifier les valeurs – seules les données en surbrillance peuvent être modifiées. • Affichages START : Mode du commencement. Toutes les valeurs sont affichées. STOP : Affichage du mode Arrêt.
Page 30
Les valeurs établies et affichées ne sont en aucun cas LIMITE SUPERIEURE DES PULSATIONS/BMI/ÂGE Disponible dans les programmes 1 à 14, programmes de pulsation et U1-U4. adaptées à une évaluation médicale. Dès que vous avez introduit votre âge, l’ordinateur calcule une valeur de A.
Page 32
PROGRAMME 1 : Manuel récupération, vous devez afficher la fréquence actuelle de vos pulsations, Ce programme correspond aux fonctions d’un home-trainer normal. Ainsi, la en posant vos mains sur les capteurs du guidon. durée, la vitesse / tours par min, la distance, les watts / joules, les pulsations 1.
Page 33
Recommandations pour l’entraînement Les facteurs ci-après doivent être pris en compte pour la détermination de l’entraînement indispensable afin d’améliorer concrètement son physique et sa santé: 1. Intensité: L’entraînement n’aura d’effets positifs que si les efforts déployés dépassent ceux de la vie quotidienne, mais sans être hors d’haleine et/ou se sentir épui- sé.
Inhoudsopgave 1. Overzicht van de losse delen pagina 2. Belangrijke aanbevelingen en veiligheidsinstructies pagina 34 3. Stuklijst pagina 35 - 36 4. Montagehandleiding met explosietekeningen pagina 37 - 39 5. Handleiding bij de computer pagina 40 - 43 6. Trainingshandleiding pagina 44 Geachte klant Wij willen u van harte gelukwensen met de aanschaf van uw hometrainer en...
Page 35
Stuklijst - reserveonderdelenlijst Wanneer een bepaald onderdeel niet in orde is of ontbreekt, of wanneer u in de toekomst een reserveronderdeel nodig heeft, kunt EM 3 best.nr. 9808 C, 98081 C u zich wenden tot: Technische specificatie: Stand: 01. 03. 2013...
Page 37
Montagehandleiding Voordat u met de montage begint, absoluut onze adviezen en veiligheidsvoorschriften in acht nemen! Vooraleer u met de montage van start gaat, onvoorwaardelijk onze aanbevelingen en veiligheidsinstructies in acht nemen! Verwijder alle individuele onderdelen uit het karton en leg ze overzichtelijk gereed opdat u met de montage kunt beginnen.
Page 38
Stap 4: Montage van de computer (1). 1. Steek de stekker van de computerkabel (6), die aan de bovenzijde uit de stuurbuis (7) steekt, in de bus aan de achterzijde van de computer (1). 2. Schuif de computer (1) op de daarvoor voorziene plaat van de stuursteunbuis (7) schroef de computer (1) m.b.v.
Page 39
Stap 7: Aansluiting van het nettoestel (77). 1. Steek de stekker van het nettoestel (77) in de desbetreffende bus op het achterste uiteinden (78) van de bekleding. 2. Steek daarna het nettoestel (77) in een contactdoos (230V/50Hz). Stap 8: Controle: 1.
Page 40
Computerhandleiding voor 9808 C, 98081 „S“: start van de training of onderbreking van de training in het gekozen programma. In de modus „STOP“ is het STOP-display verlicht. De compu- ter begint pas te tellen wanneer voordien de toets „S“ ingedrukt werd. Indien de toets „S“...
Page 41
hogere balken=hogere trapweerstand lagere balken= lagere trapweerstand elk balkensegment houdt 3 waarden in elke van de 10 tijdsbalken houdt 1/10 deel in van de opgegeven trainingstijd. KCAL/WATT/BMR: door middel van de gemiddelde waarden berekent de computer de Calorieën, die in Kcal aangegeven worden. Om de bindende maateenheid voor energie „Joule“...
Page 42
A. Programmakeuze: Programma 1 (handmatig) Programma 2 (omhoog - omlaag) Programma 3 (dal) Programma 4 (fitness) Programma 5 (platform) Programma 6 (berg) Programma 7 (interval) Programma 8 (rollend) Programma 9 (plateau) Programma 10 (rotsen) Programma 11 (interval) Programma 12 (heuvel) Programma 13 (fart lek) Programma 14 (watt-toerentalonafhankelijk) Programma lichaamsvet...
Page 43
Programma 1: handmatig de polsslagfrequentie op het einde van de training (beginpolsslag) en één Dit programma komt overeen met de functies van een normale hometrainer. minuut na het einde van de training (eindpolsslag) beroep gedaan. Zo worden hier de tijd, de snelheid/t/min, de afstand, de watt/Kcal, de ac- Start deze functie pas wanneer u een tijdje getraind hebt.
Page 44
Trainingshandleiding De onderstaande factoren moeten in acht worden genomen bij het bepalen van de benodigde training voor het bereiken van een merkbare verbetering van uw figuur en gezondheid: 1. Intensiteit: De mate van lichamelijke belasting bij de training moet de normale belasting overschrijden, zonder dat u daarbij buiten adem en/of uitgeput raakt.
Need help?
Do you have a question about the EM 3 and is the answer not in the manual?
Questions and answers
Hi! How to fix error 1 on EM3. By turning on it starts to **** and shows an error 1?
The error E1 on the Christopeit Sport EM 3 hometrainer causes the device to stop functioning and emit a beeping sound. Possible steps to fix this issue include:
1. Check all cable connections – Ensure that all plugs and connectors are securely attached.
2. Restart the device – Turn off the hometrainer, unplug it from power, wait a few minutes, and then restart it.
3. Test different programs – Some users reported that Program 14 displays values but does not adjust resistance. Try other programs to see if the issue persists.
4. Contact customer support – If the issue continues, reach out to Christopeit Sport for spare parts or further troubleshooting.
If none of these steps resolve the problem, the issue may require professional repair.
This answer is automatically generated