Onkyo TX-NR808 Instruction Manual page 23

Note
• The "Monitor Out" setting will be automatically switched to "Analog"
selected or if not connected to a priority output when "Both(Main)" or "Both(Sub)" is selected.
■
"Monitor Out" setting set to "Analog"
Video input signals flow through the AV receiver as shown,
with composite video, S-Video and PC IN (Analog RGB)
sources being upconverted for the component video output.
Use this setting if you connect the AV receiver's COMPO-
NENT VIDEO MONITOR OUT to your TV.
Composite video is upconverted to S-Video and S-Video is
downconverted to composite video. Note that these conver-
sions only apply to the MONITOR OUT V and S outputs,
not the VCR/DVR OUT V and S outputs.
The composite video, S-Video and component video outputs
pass through their respective input signals as they are.
This signal flow also applies when the "Resolution" setting
is set to "Through" (➔ 43).
Video Signal Flow and the Resolution Setting
When the "Monitor Out" setting is set to "Analog"
if the "Resolution" setting is set to anything other than
43), the video signal flow will be as shown
"Through" (➔
here, with composite video and S-Video sources being upcon-
verted for the component video output.
The composite video, S-Video, and component video outputs
pass through their respective analog input signals as they are.
HDMI input signals are not output.
Audio Connection Formats
Audio component can be connected by using any of the fol-
lowing audio connection formats: analog, optical, coaxial,
analog multichannel, or HDMI.
When choosing a connection format, bear in mind that the
AV receiver does not convert digital input signals for analog
line outputs and vice versa. For example, audio signals con-
nected to an optical or coaxial digital input are not output by
the analog VCR/DVR OUT.
If signals are present at more than one input, the inputs will
be selected automatically in the following order of priority:
HDMI, digital, analog.
(➔ 42) if not connected to both outputs when "Both" is
Composite
AV receiver
Composite
*1 PC IN (Analog RGB) input signal is output
at 720p resolution.
(➔ 42),
Composite
AV receiver
Composite
Analog
AV receiver
Analog
*1 Depends on the "Audio TV Out" setting
*2 This setting is available, when "Audio Return Channel"
setting is set to "Auto"
input selector and your TV must support ARC function.
*3
Only the front L/R channels are output.
Video Signal Flow Chart
Blu-ray Disc/DVD player, etc.
S-Video Component
PC IN
(Analog RGB)
IN
MONITOR OUT
Component
S-Video
* 1
TV, projector, etc.
Video Signal Flow Chart
Blu-ray Disc/DVD player, etc.
S-Video Component
IN
MONITOR OUT
Component
S-Video
TV, projector, etc.
Audio Signal Flow Chart
Blu-ray Disc/DVD player, etc.
Multichannel Coaxial
Optical
IN
* 1
* 1 * 3 1
*
*
3
*
OUT
TV, projector, etc.
(➔ 56).
57), you must select the TV/CD
(➔
HDMI
HDMI
HDMI
HDMI
HDMI
1
HDMI
1 2
* *
En
23