Toro 30626 Operator's Manual page 13

93-7832
(Models 30630 & 30631)
1. To move the traction unit forward or backward, depress the
traction pedal.
2. Tipping hazard—when driving down slopes less that 14
degrees, lower the cutting unit to the ground. When driving
down slopes less than 20 degrees, use the ROPS, fasten the
seat belt, and lower the cutting unit to the ground.
3. Warning—disengage the Power Take Off before raising the
cutting unit.
4. Float cutting unit
5. Lower cutting unit
6. Raise cutting unit
(Models 30626 & 30627)
13
66-6390