Toro 30626 Operator's Manual page 12

100-6574
(Models 30630 & 30631)
1. Hot surface hazard—stay
away.
72-3700
(Model 30627)
93-7839
(Model 30631)
1. Danger—read the operator's manual.
2. Tipping hazard—when driving down slopes less that 14
degrees, lower the cutting unit to the ground. When driving
down slopes less than 20 degrees, use the ROPS, fasten the
seat belt, and lower the cutting unit to the ground.
2. Cutting/dismemberment
hazard—stay away from
moving parts.
12
70–2560
(Model 30627)
1. Change the rear axle lubricant initially after first 50 operating
hours, thereafter every 500 hours
93–6697
(Model 30631)
1. Read operator manual
2. Change the rear axle lubricant initially after first 50 operating
hours, thereafter every 500 hours
67–5360
(Models 30626 & 30627)