Moravian Instruments G0 User Manual page 5

Hide thumbs Also See for G0:
Table of Contents

Advertisement

Please note the G0 and G1 CCD cameras are designed to work in
cooperation with a host Personal Computer (PC). Computer is necessary for
operation control, image download, processing and storage as well as for
guiding. To operate G0 or G1 CCD camera, you need a computer which:
1. Is compatible with a PC standard.
2. Runs a modern 32 or 64-bit Windows operating system.
Drivers for 32-bit and 64-bit Linux systems are also provided, but
camera control and image processing software, supplied with the
camera, requires Windows operating system.
3. Provides at last one free USB port.
The G0 and G1 CCD cameras are designed to operate with
USB 2.0 high-speed (480 Mbps) hosts. Although they are fully
backward compatible with USB 1.1 full-speed (12 Mbps) hosts,
image download time can be significantly longer if USB 1.1
connection is used.
A simple and cheap device called USB hub can expand number of
available USB port. Typical USB hub occupies one computer USB
port and offers four free ports. Make sure the USB hub is USB 2.0
high-speed compatible.
But keep on mind that if more USB devices connected to one hub
need to communicate with a host PC, USB hub shares its single
up-link line to the host PC. Although G0 and G1 CCD cameras can
operate through a USB hub, it can negatively affect the camera
performance, like download time etc. It is recommended to
connect other USB devices through USB hub (e.g. the mouse) and
to provide the camera a direct USB connection to the host PC.
Also note the G0 and G1 cameras are powered from the host PC
through the USB cable. Unpowered USB hub may not provide
enough current to operate the camera. Always use USB hub with
its own power supply to connect the camera. G0 and G1 camera
power considerations are described later.
4. Alternatively it is possible to use the Gx Camera Ethernet Adapter.
This device can connect up to four Gx cameras of any type (not
only G0 and G1, but also G2, G3 and G4) and offers 1 Gbps and
10/100 Mbps Ethernet interface for direct connection to the host
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

G1

Table of Contents