Toro DH 200 Setup Instructions page 3

3
Attaching the Trailer Hitch
Parts needed for this procedure:
1 Trailer Hitch
2 Bolts
2 Nuts
Procedure
1. Line up the holes in the trailer hitch with the holes in
the machine frame.
2. Attach the hitch with two bolts and nuts (Figure 3).
1. Trailer hitch
2. Bolt
Figure 3
3. Nut
4
Assembling the Grass
Collector
Parts needed for this procedure:
1 Collector Cover
1 Grass Collector—Partially Assembled
1 Grass Bag
1 Fastener Package
1 Arrow Decal
Procedure
1. Tilt the front tube of the partially assembled
collector.
2. Align the upper holes with the holes on the upper
tube. Loosely fasten the tubes together with the
upper bolts (Figure 4).
3